Juniper certification JN0-201 exam best training materials

IT-Tests.com senior experts have developed exercises and answers about Juniper certification JN0-201 exam with their knowledge and experience, which have 95% similarity with the real exam. I believe that you will be very confident of our products. If you choose to use IT-Tests's products, IT-Tests.com can help you 100% pass your first time to attend Juniper certification JN0-201 exam. If you fail the exam, we will give a full refund to you.

Using IT-Tests.com you can pass the Juniper JN0-201 exam easily. The first time you try to participate in Juniper JN0-201 exam, selecting IT-Tests's Juniper JN0-201 training tools and downloading Juniper JN0-201 practice questions and answers will increase your confidence of passing the exam and will effectively help you pass the exam. Other online websites also provide training tools about Juniper certification JN0-201 exam, but the quality of our products is very good. Our practice questions and answers have high accuracy. Our training materials have wide coverage of the content of the examination and constantly update and compile. IT-Tests.com can provide you with a very high accuracy of exam preparation. Selecting IT-Tests.com can save you a lot of time, so that you can get the Juniper JN0-201 certification earlier to allow you to become a Juniper IT professionals.

If you buy the IT-Tests's products, we will not only spare no effort to help you pass the certification exam, but also provide a free update and upgrade service. If the official change the outline of the certification exam, we will notify customers immediately. If we have any updated version of test software, it will be immediately pushed to customers. IT-Tests.com can promise to help you succeed to pass your first Juniper certification JN0-201 exam.

IT-Tests.com's Juniper JN0-201 exam training materials is the best training materials. If you are an IT staff, it will be your indispensable training materials. Do not take your future betting on tomorrow. IT-Tests.com's Juniper JN0-201 exam training materials are absolutely trustworthy. We are dedicated to provide the materials to the world of the candidates who want to participate in IT exam. To get the Juniper JN0-201 exam certification is the goal of many IT people & Network professionals. The pass rate of IT-Tests.com is incredibly high. We are committed to your success.

Exam Code: JN0-201
Exam Name: Juniper (Juniper networks Certified internet associate.m(jncia-m))
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 120 Questions and Answers
Last Update: 2014-03-11

All the IT professionals are familiar with the Juniper JN0-201 exam. And everyone dreams pass this demanding exam. Juniper JN0-201 exam certification is generally accepted as the highest level. Do you have it? About the so-called demanding, that is difficult to pass the exam. This does not matter, with the IT-Tests.com's Juniper JN0-201 exam training materials in hand, you will pass the exam successfully. You feel the exam is demanding is because that you do not choose a good method. Select the IT-Tests.com, then you will hold the hand of success, and never miss it.

JN0-201 (Juniper networks Certified internet associate.m(jncia-m)) Free Demo Download: http://www.it-tests.com/JN0-201.html

NO.1 What is the purpose of the OSPF link-state update packet?
A. describes a change to the OSPF hello timer
B. carries one or more link-state advertisements
C. establishes and maintains neighbor relationships
D. describes the contents of the entire link-state database
Answer: B

Juniper exam prep   JN0-201 test   JN0-201 demo   JN0-201 exam simulations   JN0-201

NO.2 What type of OSPF router is responsible for redistributing routes into OSPF?
A. ABR
B. ASBR
C. internal router
D. backbone router
Answer: B

Juniper exam simulations   JN0-201   JN0-201 braindump   JN0-201 questions   JN0-201 pdf

NO.3 During OSPF adjacency formation, in what state is a router when it is negotiating to be in charge of the
database synchronization process?
A. Init
B. 2Way
C. ExStart
D. Exchange
Answer: C

Juniper pdf   JN0-201   JN0-201   JN0-201 exam

NO.4 What command would you use to view an IS-IS adjacency?
A. show iso neighbor
B. show isis neighbor
C. show iso adjacency
D. show isis adjacency
Answer: D

Juniper study guide   JN0-201 answers real questions   JN0-201   JN0-201

NO.5 Assume that a comparable configuration is applied to your peer in AS 11 and that bi-directional TCP
reachability has been achieved. Which EBGP configuration will allow the BGP session to become
established?
A. routing-options { autonomous-system 64; } protocols { bgp { group external-peer11 { type external;
neighbor 10.0.3.6 { peer-as 11; } } }
B. routing-options { autonomous-system 11; } protocols { bgp { group external-peer1 { type external;
peer-as 11;{ neighbor 10.0.3.6; } }
C. routing-options { autonomous-system 11; } protocols { bgp { group external-peer11 { type external;
peer-as 64;{ neighbor 10.0.3.6; } group external-peer11 { type external; peer-as 64;{ neighbor
10.0.3.6; } } type external; peer-as 64;{ neighbor 10.0.3.6; } } peer-as 64;{ neighbor 10.0.3.6; } }
neighbor 10.0.3.6; } }
D. routing-options { }
E. routing-options { autonomous-system 64; }
F. routing-options { autonomous-system 64; }
G. routing-options { autonomous-system 64; } protocols {
H. routing-options { autonomous-system 64; } protocols { bgp { autonomous-system 64; } protocols { bgp
{ group external-peer101 { } protocols { bgp { group external-peer101 { peer-as 101; protocols { bgp
{ group external-peer101 { peer-as 101; neighbor 10.0.3.6; protocols { bgp { group external-peer101
{ peer-as 101; neighbor 10.0.3.6; } bgp { group external-peer101 { peer-as 101; neighbor 10.0.3.6; } }
group external-peer101 { peer-as 101; neighbor 10.0.3.6; } } peer-as 101; neighbor 10.0.3.6; } }
neighbor 10.0.3.6; } } } } }
Answer: A

Juniper   JN0-201   JN0-201   JN0-201 exam

NO.6 Why would you make a non-backbone area a stub or not-so-stubby area?
A. to aggregate routes learned from the ABR
B. to lower the cost of routes advertised by the ABR
C. to connect a non-contiguous area to the backbone
D. to decrease the size of the link-state database in that area
Answer: D

Juniper exam simulations   JN0-201 dumps   JN0-201   JN0-201   JN0-201 exam

NO.7 Two Level 2 routers are exchanging Hello packets with different Area IDs. What occurs between these
routers?
A. An Adjacency forms.
B. An Adjacency does not form.
C. An Adjacency forms but traffic is not forwarded.
D. No IS-IS PDUs are sent.
Answer: A

Juniper   JN0-201   JN0-201   JN0-201 exam prep

NO.8 What are two ways that a valid IBGP peering session can be configured? (Choose two.)
A. via the accept x.x/y command
B. via TCP reachable physical interface addresses
C. via remote loopbacks with the local-address command
D. via UDP with the neighbor x.x.x.x command at the group level
Answer: BC

Juniper exam prep   JN0-201 test questions   JN0-201 study guide   JN0-201 study guide   JN0-201   JN0-201

NO.9 Which CLI command is used to see the current OSPF link-state database?
A. show ospf database
B. show ospf neighbor
C. show protocols ospf
D. show ospf link-state
Answer: A

Juniper test   JN0-201   JN0-201   JN0-201

NO.10 How often are IS-IS Hello packets transmitted?
A. 3 seconds for DIS; 9 seconds for non-DIS
B. 9 seconds for DIS; 3 seconds for non-DIS
C. 10 seconds for DIS; 3 seconds for non-DIS
D. 10 seconds for all routers
Answer: A

Juniper   JN0-201   JN0-201   JN0-201   JN0-201   JN0-201 certification training

NO.11 How do you enable interface fe-0/0/0 under the [edit protocols isis] level to form both a Level 1 and
Level 2 adjacency?
A. set interface fe-0/0/0.0
B. set interface fe-0/0/0.0 all level
C. set interface fe-0/0/0.0 level 3 enable
D. set interface fe-0/0/0.0 level 1 level 2
Answer: A

Juniper exam   JN0-201 exam dumps   JN0-201 answers real questions

NO.12 Once the TCP connection is established, which message type initiates the BGP peering process?
A. Open
B. Active
C. Update
D. Keepalive
E. Notification
Answer: A

Juniper exam simulations   JN0-201 test answers   JN0-201   JN0-201   JN0-201

NO.13 What is the first step in BGP route selection?
A. The local router prefers the route with the shortest AS_PATH.
B. The router first verifies that it has a route to the BGP Next Hop IP address.
C. The local router prefers the route from the peer with the lowest peer ID address.
D. The local router prefers the route learned from an EBGP peer over a route learned from an IBGP peer.
Answer: B

Juniper   JN0-201   JN0-201 test   JN0-201 exam dumps

NO.14 Three IS-IS routers on a broadcast segment have different priority values configured. Which router is
elected the DIS on that broadcast segment?
A. the router with the lowest priority
B. the router with the highest priority
C. the router with the highest System ID
D. the router with the highest IP address
Answer: B

Juniper exam   JN0-201   JN0-201 test   JN0-201

NO.15 What are two purposes of the AS_PATH attribute? (Choose two.)
A. route selection
B. loop avoidance
C. determining equal cost paths for reachablilty
D. defining the application of other BGP attributes
Answer: AB

Juniper test answers   JN0-201   JN0-201

NO.16 By default, which command can be used to display information about packets that have been logged
with the syslog firewall filter action?
A. show log
B. show firewall
C. show log messages
D. show firewall log
Answer: C

Juniper test answers   JN0-201 exam prep   JN0-201   JN0-201   JN0-201

NO.17 Firewall filters can be used to accept, discard, or reject packets based on _____. (Choose three.)
A. protocol type
B. MAC address
C. TCP or UDP port
D. source and destination IP address
Answer: ACD

Juniper   JN0-201   JN0-201 certification training   JN0-201

NO.18 If all OSPF routers on a broadcast network have the same OSPF priority, what parameter is used to
determine the new BDR at the time of a DR failure?
A. area ID
B. router ID
C. loopback address
D. IP address of interface on broadcast network
Answer: B

Juniper exam   JN0-201 test   JN0-201

NO.19 What are the three components of the ISO NET address? (Choose three.)
A. Area ID
B. N-selector
C. System ID
D. AS number
E. ISO number
F. MAC address
Answer: ABC

Juniper   JN0-201 test questions   JN0-201   JN0-201 certification   JN0-201 answers real questions   JN0-201

NO.20 A firewall filter is applied as an input filter on a transit interface. What three types of traffic will this affect?
(Chose three.)
A. inbound traffic transiting the router
B. outbound traffic transiting the router
C. traffic destined to the Routing Engine
D. traffic destined to the interface address on which the filter is applied
Answer: ACD

Juniper original questions   JN0-201   JN0-201 exam dumps

IT-Tests.com offer the latest C_TSCM62_65 Questions & Answers and high-quality JN0-692 PDF Practice Test. Our 000-455 VCE testing engine and CUR-009 study guide can help you pass the real exam. High-quality 70-463 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.it-tests.com/JN0-201.html