Adobe certification 9A0-096 exams has a pivotal position in the IT industry, and I believe that a lot of IT professionals agree with it. Passing Adobe certification 9A0-096 exam has much difficulty and needs to have perfect IT knowledge and experience. Because after all, Adobe certification 9A0-096 exam is an authoritative test to inspect examinees' IT professional knowledge. If you have got a Adobe 9A0-096 certification, your IT professional ability will be approved by a lot of IT company. IT-Tests.com also has a pivotal position in IT training industry. Many IT personnels who have passed Adobe certification 9A0-096 exam used IT-Tests's help to pass the exam. This explains why IT-Tests's pertinence training program is very effective. If you use the training material we provide, you can 100% pass the exam.
IT-Tests.com is a website that specializes in providing IT exam information. The pass rate can achieve 100%. Which is one of the reasons that most candidates willing to believe the IT-Tests.com. IT-Tests.com have been always concerned about the needs of the majority of candidates. We always with the greatest ability to meet the needs of the candidates . IT-Tests.com's Adobe 9A0-096 exam training materials is an unprecedented IT certification training materials. With it, your future career will be rain or shine.
If you buy the IT-Tests's products, we will not only spare no effort to help you pass the certification exam, but also provide a free update and upgrade service. If the official change the outline of the certification exam, we will notify customers immediately. If we have any updated version of test software, it will be immediately pushed to customers. IT-Tests.com can promise to help you succeed to pass your first Adobe certification 9A0-096 exam.
Exam Code: 9A0-096
Exam Name: Adobe (Adobe AfterEffects CS4 Exam)
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 143 Questions and Answers
Last Update: 2014-03-24
IT-Tests.com is a professional website. It can give each candidate to provide high-quality services, including pre-sales service and after-sales service. If you need IT-Tests.com's Adobe 9A0-096 exam training materials, you can use part of our free questions and answers as a trial to sure that it is suitable for you. So you can personally check the quality of the IT-Tests.com Adobe 9A0-096 exam training materials, and then decide to buy it. If you did not pass the exam unfortunately, we will refund the full cost of your purchase. Moreover, we can give you a year of free updates until you pass the exam.
In order to meet the demand of most of the IT employees, IT-Tests's IT experts team use their experience and knowledge to study the past few years Adobe certification 9A0-096 exam questions. Finally, IT-Tests's latest Adobe 9A0-096 simulation test, exercise questions and answers have come out. Our Adobe 9A0-096 simulation test questions have 95% similarity answers with real exam questions and answers, which can help you 100% pass the exam. If you do not pass the exam, IT-Tests.com will full refund to you. You can also free online download the part of IT-Tests's Adobe certification 9A0-096 exam practice questions and answers as a try. After your understanding of our reliability, I believe you will quickly add IT-Tests's products to your cart. IT-Tests.com will achieve your dream.
9A0-096 (Adobe AfterEffects CS4 Exam) Free Demo Download: http://www.it-tests.com/9A0-096.html
NO.1 Which tool lets you change the point from which transformations happen to a layer in the Composition
panel, without changing the layer's appearance or position?
A. Selection tool
B. Puppet Pin tool
C. Pan Behind tool
D. Convert Vertex tool
E. Unified Camera tool
Answer: C
Adobe 9A0-096 practice test 9A0-096 test answers
NO.2 Click the Exhibit button.
What should you do in order to create a different wiggle motion for each one of the star shape duplicates
of a single Shape Layer, that already has the Repeater operator applied?
A. add a Wiggle Paths operator before the Repeater operator, then open the Wiggle Paths settings and
adjust the Size value
B. add a Wiggle Paths operator after the Repeater operator, then open the Wiggle Paths settings and
adjust the Wiggles/Second value
C. add a Wiggle Transform operator after the Repeater operator, then open the Wiggle Transform settings
and adjust the Transform values
D. add a Wiggle Transform operator before the Repeater operator, then open the Wiggle Transform
settings and adjust the Transform values
Answer: C
Adobe 9A0-096 test answers 9A0-096 test answers 9A0-096 9A0-096 9A0-096 exam dumps
NO.3 In the Paint panel, what does the Flow attribute affect?
A. the maximum amount of paint applied
B. how quickly paint is applied or removed
C. the ratio between the short and long axes of a brush
D. how pixels in the underlying image are blended with the pixels painted
Answer: B
Adobe test answers 9A0-096 test questions 9A0-096 exam dumps 9A0-096 certification training 9A0-096
NO.4 A composition contains a Shape Layer containing four separate parametric shapes, each with different
fill and stroke attributes. You have grouped the four parametric shapes into one master group.
Which statement is true about the fill and stroke attributes the four parametric shapes will have in the
master group?
A. The parametric shapes will retain their original fill and stroke attributes.
B. Attributes of the top parametric shape in the Timeline panel will be applied.
C. Attributes of the bottom parametric shape in the Timeline panel will be applied.
D. Current attributes of the Fill and Stroke options in the Tool panel will be applied.
Answer: A
Adobe braindump 9A0-096 braindump 9A0-096 certification training 9A0-096
NO.5 You wish to animate a path to create a write-on effect.
Which path operator should you choose from the Add pulldown menu next to the shape layer in the
timeline?
A. Twist
B. Trim Paths
C. Offset Paths
D. Merge Paths
Answer: B
Adobe test questions 9A0-096 exam simulations 9A0-096 questions 9A0-096
NO.6 How can you recognize the vertex designated as the first vertex of a path?
A. It appears as corner point in the Composition viewer.
B. It appears as the top-most vertex in the Composition panel.
C. It appears slightly larger than the other vertices in the Composition panel.
D. It appears as vertex #1 in the Info panel when that mask vertex is selected in the Composition viewer.
Answer: C
Adobe test 9A0-096 9A0-096 answers real questions 9A0-096 study guide 9A0-096
NO.7 You have opened a project and identified that the same footage appears multiple times in the Project
panel, and you wish to remove all duplicate footage items from the project.
What should you do?
A. choose File > Collect Files
B. choose File > Reduce Project
C. choose File > Consolidate All Footage
D. choose File > Remove Unused Footage
Answer: C
Adobe practice test 9A0-096 9A0-096 demo
NO.8 You are interpolating between two keyframed mask shape paths by using the Smart Mask Interpolation
panel.
Which option in the Smart Mask Interpolation panel lets you control how Smart Mask Interpolation
matches vertices one keyframe to another keyframe?
A. Quality
B. Matching Method
C. First Vertices Match
D. Bending Resistance
E. Add Mask Shape Vertices
Answer: A
Adobe 9A0-096 9A0-096 9A0-096 study guide
NO.9 When working in an After Effects Composition panel, you need to lock the current composition viewer,
split the current frame, and create a new composition viewer in the frame.
Which action performs this function in the Composition panel?
A. choose Maximize Frame from the Composition panel menu
B. press Ctrl+Alt+Shift+N (Windows) or Command+Option+Shift+N (Mac OS) on the keyboard
C. lock the Composition panel and choose Maximize Frame from the Composition panel menu
D. Ctrl (Windows) or Command (Mac OS) drag the gripper area in the upper-left corner of the
Composition panel into the center of the work area
E. Ctrl (Windows) or Command (Mac OS) drag the group gripper in the upper-right corner of the
Composition panel into the center of the work area
Answer: B
Adobe exam dumps 9A0-096 dumps 9A0-096
NO.10 You have applied the Bevel and Emboss layer style to several text layers in an After Effects
composition and have enabled the Use Global Light option.
Which two options in the Bevel and Emboss layer style will be overridden by enabling the Use Global
Light option? (Choose two.)
A. Size
B. Angle
C. Depth
D. Altitude
E. Direction
F. Technique
G. Shadow Mode
H. Highlight Mode
Answer: BD
Adobe dumps 9A0-096 answers real questions 9A0-096 9A0-096 original questions 9A0-096
NO.11 You have created a Text Layer in a composition and have animated the Opacity property to create a
write on effect where the letters pop on without any transition in opacity. When previewing the composition,
you find that the text characters in the animation are gradually fading up instead of popping on.
Which options in the Timeline panel will you apply to remove the gradual fading up of the text characters
and have them pop on without a transition in opacity?
A. Shape > Square > Smoothness = 0
B. Shape > Ramp Up > Smoothness = 0
C. Shape > Square > Smoothness = 100
D. Shape > Ramp Up > Smoothness = 100
E. Shape > Ramp Down > Smoothness = 0
F. Shape > Ramp Down > Smoothness = 100
Answer: A
Adobe 9A0-096 test questions 9A0-096 9A0-096 demo
NO.12 When applying the Wiggle Paths path operator to a shape group on a Shape Layer, which option
controls how far a path is bent?
A. Size
B. Detail
C. Points
D. Correlation
E. Spatial Phase
Answer: A
Adobe study guide 9A0-096 exam dumps 9A0-096 dumps
NO.13 Click the Exhibit button.
You create a Shape Layer, add a new path and draw an open-ended line with the Pen tool. You add a
stroke, set its width to 40 pixels, and set its Line Cap option to Projecting Cap.
What is the resulting effect to the ends of the stroke?
A. The stroke ends fade out to 0% opacity over 20 pixels on each end.
B. The stroke ends are rounded off with a 40 pixel diameter semicircle on each end.
C. The stroke ends are squared off at the exact points defining the start and finish of the path.
D. The stroke ends are squared off with an additional 20 pixels beyond the points defining the start and
finish of the path.
Answer: D
Adobe 9A0-096 9A0-096 test 9A0-096
NO.14 Which action lets you motion sketch an animation with the Puppet Pin tool?
A. drag a Deform pin with the Puppet Pin tool
B. place Deform pins at different points in time in the Composition panel
C. place Puppet Overlap pins at different points in time in the Composition panel
D. drag a Deform pin with the Control key (Windows) or Command key (Mac OS)
E. drag a Puppet Overlap pin with the Control key (Windows) or Command key (Mac OS)
Answer: D
Adobe 9A0-096 exam 9A0-096 answers real questions
NO.15 What should you do if you wish to apply an animated dashed Stroke effect to a Text Layer?
A. select the Text Layer and go to Layer > Effect > Stroke
B. go to Layer > Create Masks from Text, then select the resulting Shape Layer and go to Effect >
Generate > Stroke
C. go to Layer > Create Shapes from Text, then select the resulting Shape Layer and go to Effect >
Generate > Stroke
D. use the Character panel to define and apply the Stroke settings on the Text Layer, then animate the
Stroke properties in the timeline
Answer: B
Adobe test questions 9A0-096 certification 9A0-096 braindump 9A0-096 original questions
NO.16 You wish to create a text animation that will have the letters change color while letting the words
animate position, rotation, and scale.
Which option in the Timeline panel will let you create the text animation?
A. Advanced > Based On
B. Add > Selector > Range
C. Add > Selector > Wiggly
D. Add > Property > Character Offset
E. Add > Property > Per Character 3D
F. Add > Property > All Transform Properties
Answer: B
Adobe 9A0-096 pdf 9A0-096 9A0-096 exam
NO.17 Which string do you need to type in the project's Quick Search field, to show footage items that are left
outside of the current project?
A. unused
B. missing
C. notshown
D. notpresent
Answer: A
Adobe practice test 9A0-096 9A0-096
NO.18 What should you do to apply permanent motion blur to a mask?
A. select the mask, then choose Layer > Mask > Motion Blur > On
B. select the mask, then choose Layer > Mask > Motion Blur > Same As Layer
C. select the mask, then click the Motion Blur switch for the layer in the timeline
D. select the mask, then click the Composition Motion Blur switch in the timeline
Answer: A
Adobe braindump 9A0-096 original questions 9A0-096 9A0-096 test answers
NO.19 Which two statements are true about the creation of a new Shape Layer? (Choose two.)
A. Fill and Stroke will default to transparent until you modify them.
B. Fill and Stroke properties are set to the last fill and stroke used.
C. Fill will always default to solid red, and Stroke to 3 pixel white solid line.
D. Fill will always default to transparent, and Stroke to 3 pixel white solid line.
E. Fill and Stroke properties are set according to the swatch buttons in the Tools panel.
Answer: BE
Adobe 9A0-096 9A0-096 exam simulations 9A0-096 dumps 9A0-096 9A0-096
NO.20 You have applied Motion Blur to an animating mask shape.
Which option lets you control the amount of blurring to the mask as it animates?
A. Mask Feather
B. Mask Expansion
C. Layer > Masks > Motion Blur
D. Composition Settings > Advanced > Shutter Angle
E. Composition Settings > Advanced > Shutter Phase
Answer: D
Adobe 9A0-096 9A0-096 questions
NO.21 When pasting a mask path from an After Effects layer into the Position property for an object in the
Timeline panel, the size of the resulting motion path needs to be a different size than the original mask
path.
Which action lets you resize the motion path?
A. apply the Free Transform Points command to the position keyframes
B. convert the roving keyframes created when pasting the path to the Position property into Bezier
keyframes
C. resize the mask path in a solid layer the size of the composition before pasting the path into the
Position property
D. set the Display > Motion Path section of After Effects Preferences to show all keyframes before pasting
the path into the Position property
Answer: C
Adobe test answers 9A0-096 pdf 9A0-096 9A0-096 test
NO.22 How can you find out the number vertices of a mask?
A. select the mask in the timeline and look in the Info panel
B. select the mask in the timeline, open the Mask properties and look under Mask Path
C. select the mask in the Composition panel, right-click on it, select Mask and select Vertices at the
bottom of the menu
D. select the mask in the Composition panel, go to Layer > Mask > Mask Shape to bring up the Mask
Shape dialog box containing the vertices information
Answer: A
Adobe 9A0-096 9A0-096 exam prep 9A0-096 exam prep
NO.23 When previewing an After Effects composition that contains several nested compositions, a Timeline
panel different from the current Composition panel plays.
What is causing this scenario?
A. The Timeline panel is locked.
B. The Composition panel is locked.
C. The Maximize Frame command has been enabled for the Timeline panel.
D. The Maximize Frame command has been enabled for the Composition panel.
E. You have selected a nested composition in the Timeline panel with the mouse before previewing.
Answer: B
Adobe 9A0-096 certification 9A0-096 exam 9A0-096 certification 9A0-096 dumps
NO.24 What is the purpose of the Random Seed option under the Advanced section of a type Range
Selector's properties?
A. to determine the speed of change between the Ease High and Ease Low values of the Range Selector
B. to randomize the order in which the animated property is applied to the characters specified by the
Range Selector
C. to calculate the order in which specific characters within that Range Selector are affected by the text
animator you apply
D. to determine the amount of time the animation takes to transition from one character to another, when
using the Square shape setting
Answer: C
Adobe 9A0-096 original questions 9A0-096
NO.25 Which statement is true about typing the string Anchor in the Quick Search option of the Timeline
panel when no layers are selected?
A. No Anchor Point properties will be revealed.
B. All Anchor Point properties for all layers will be revealed.
C. Only keyframed Anchor Point properties will be revealed.
D. Anchor Point properties for hidden layers will not be revealed.
Answer: B
Adobe exam prep 9A0-096 9A0-096 9A0-096 certification 9A0-096 9A0-096
NO.26 You have formatted several letters on a Text Layer with the Character panel using the Fill Over Stroke
feature for some letters and the Stroke Over Fill feature for other letters.
Which setting in the Timeline panel preserves those features on the Type Layer when the All Fills Over All
Strokes option is selected from the Character panel?
A. Animate > Character Value
B. Fill & Stroke > Per Character panel
C. Inter-Character Blending > Overlay
D. Anchor Point Grouping > Character
E. Fill & Stroke > All Strokes Over All Fills
Answer: B
Adobe exam 9A0-096 9A0-096 dumps 9A0-096 exam prep 9A0-096 9A0-096 exam simulations
NO.27 You have a composition containing two layers. The bottom layer in the Timeline panel contains a map.
The top layer in the Timeline panel is comprised of a Shape Layer with a stroked pen path. You wish to
wipe on the stroked pen path with a Shape Layer path operator to follow a road on the bottom layer.
What lets you simulate an animated line on the Shape Layer?
A. Zig Zag
B. Repeater
C. Trim Paths
D. Offset Paths
E. Wiggle Paths
Answer: C
Adobe 9A0-096 certification training 9A0-096 9A0-096 test answers
NO.28 You would like to animate the Fill and Stroke properties for a Text Layer in a composition.
Which option in the Timeline panel lets you keyframe the Fill and Stroke properties for a Text Layer?
A. Transform
B. Source Text
C. Path Options
D. Inter-Character Blending
Answer: B
Adobe 9A0-096 9A0-096 9A0-096
NO.29 How do you undo a change and all changes after it?
A. choose File > Revert
B. choose Edit > Undo [action]
C. choose Edit > History, and select the last change that you wish to undo
D. choose Edit > History, and select the first change that you wish to undo
Answer: D
Adobe 9A0-096 exam 9A0-096 certification 9A0-096 9A0-096
NO.30 Click the Exhibit button.
You are working in a composition that has the two layers shown in the exhibit. Layer 1 has a mask applied
to it. You wish to animate the position of Layer 2 using the mask path coordinates from Layer 1.
What is the most efficient process?
A. select Layer 2, then use the Parent drop-down menu option next to the layer in the timeline to set its
parent layer to Layer 1
B. select Layer 1, open the Mask attributes in the timeline, select the Mask Path and go to Edit > Copy,
then select Layer 2 and go to Edit > Paste
C. select Layer 1, open the Mask attributes in the timeline, select the Mask Path and go to Edit > Copy,
then select Layer 2, open the Transform attributes, select the Position property, and go to Edit > Paste
D. open the Mask attributes for Layer 1 in the timeline, select Layer 2, open its Transform attributes, and
set an expression for the Position by pressing Option/ALT and clicking the stopwatch, then drag the pick
whip icon onto the Mask Path of Layer 1
Answer: C
Adobe 9A0-096 pdf 9A0-096 certification 9A0-096 test answers
IT-Tests.com offer the latest 000-588 Questions & Answers and high-quality 70-561 PDF Practice Test. Our VCE testing engine and M2020-645 study guide can help you pass the real exam. High-quality 350-029 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.
Article Link: http://www.it-tests.com/9A0-096.html
没有评论:
发表评论