IT-Tests.com is website that can take you access to the road of success. IT-Tests.com can provide the quickly passing Juniper certification JN0-201 exam training materials for you, which enable you to grasp the knowledge of the certification exam within a short period of time, and pass Juniper certification JN0-201 exam for only one-time.
As we all know, IT-Tests.com's Juniper JN0-201 exam training materials has very high profile, and it is also well-known in the worldwide. Why it produces such a big chain reaction? This is because IT-Tests.com's Juniper JN0-201 exam training materials is is really good. And it really can help us to achieve excellent results.
Exam Code: JN0-201
Exam Name: Juniper (Juniper networks Certified internet associate.m(jncia-m))
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 120 Questions and Answers
Last Update: 2013-12-09
In order to protect the vital interests of each IT certification exams candidate, IT-Tests.com provides high-quality Juniper JN0-201 exam training materials. This exam material is specially developed according to the needs of the candidates. It is researched by the IT experts of IT-Tests.com. Their struggle is not just to help you pass the exam, but also in order to let you have a better tomorrow.
IT-Tests.com to provide you with the real exam environment to help you find the real Juniper JN0-201 exam preparation process. If you are a beginner or want to improve your professional skills, IT-Tests.com Juniper JN0-201 will help you, let you approached you desire step by step. If you have any questions on the exam question and answers, we will help you solve it. Within a year, we will offer free update.
There are different ways to achieve the same purpose, and it's determined by what way you choose. A lot of people want to pass Juniper certification JN0-201 exam to let their job and life improve, but people participated in the Juniper certification JN0-201 exam all knew that Juniper certification JN0-201 exam is not very simple. In order to pass Juniper certification JN0-201 exam some people spend a lot of valuable time and effort to prepare, but did not succeed.
JN0-201 (Juniper networks Certified internet associate.m(jncia-m)) Free Demo Download: http://www.it-tests.com/JN0-201.html
NO.1 By default, which command can be used to display information about packets that have been logged
with the syslog firewall filter action?
A. show log
B. show firewall
C. show log messages
D. show firewall log
Answer: C
Juniper exam prep JN0-201 exam prep JN0-201 JN0-201
NO.2 Two Level 2 routers are exchanging Hello packets with different Area IDs. What occurs between these
routers?
A. An Adjacency forms.
B. An Adjacency does not form.
C. An Adjacency forms but traffic is not forwarded.
D. No IS-IS PDUs are sent.
Answer: A
Juniper test JN0-201 exam JN0-201 exam simulations JN0-201 certification JN0-201
NO.3 If all OSPF routers on a broadcast network have the same OSPF priority, what parameter is used to
determine the new BDR at the time of a DR failure?
A. area ID
B. router ID
C. loopback address
D. IP address of interface on broadcast network
Answer: B
Juniper JN0-201 JN0-201
NO.4 How often are IS-IS Hello packets transmitted?
A. 3 seconds for DIS; 9 seconds for non-DIS
B. 9 seconds for DIS; 3 seconds for non-DIS
C. 10 seconds for DIS; 3 seconds for non-DIS
D. 10 seconds for all routers
Answer: A
Juniper test answers JN0-201 answers real questions JN0-201 JN0-201
NO.5 Why would you make a non-backbone area a stub or not-so-stubby area?
A. to aggregate routes learned from the ABR
B. to lower the cost of routes advertised by the ABR
C. to connect a non-contiguous area to the backbone
D. to decrease the size of the link-state database in that area
Answer: D
Juniper JN0-201 JN0-201 exam prep JN0-201
NO.6 During OSPF adjacency formation, in what state is a router when it is negotiating to be in charge of the
database synchronization process?
A. Init
B. 2Way
C. ExStart
D. Exchange
Answer: C
Juniper JN0-201 JN0-201 JN0-201 JN0-201
NO.7 What are two purposes of the AS_PATH attribute? (Choose two.)
A. route selection
B. loop avoidance
C. determining equal cost paths for reachablilty
D. defining the application of other BGP attributes
Answer: AB
Juniper JN0-201 JN0-201
NO.8 Firewall filters can be used to accept, discard, or reject packets based on _____. (Choose three.)
A. protocol type
B. MAC address
C. TCP or UDP port
D. source and destination IP address
Answer: ACD
Juniper JN0-201 JN0-201
NO.9 Three IS-IS routers on a broadcast segment have different priority values configured. Which router is
elected the DIS on that broadcast segment?
A. the router with the lowest priority
B. the router with the highest priority
C. the router with the highest System ID
D. the router with the highest IP address
Answer: B
Juniper exam simulations JN0-201 exam simulations JN0-201 JN0-201 study guide JN0-201 questions
NO.10 What are two ways that a valid IBGP peering session can be configured? (Choose two.)
A. via the accept x.x/y command
B. via TCP reachable physical interface addresses
C. via remote loopbacks with the local-address command
D. via UDP with the neighbor x.x.x.x command at the group level
Answer: BC
Juniper JN0-201 test answers JN0-201 exam
NO.11 What type of OSPF router is responsible for redistributing routes into OSPF?
A. ABR
B. ASBR
C. internal router
D. backbone router
Answer: B
Juniper demo JN0-201 test JN0-201 JN0-201 pdf JN0-201 JN0-201
NO.12 What is the first step in BGP route selection?
A. The local router prefers the route with the shortest AS_PATH.
B. The router first verifies that it has a route to the BGP Next Hop IP address.
C. The local router prefers the route from the peer with the lowest peer ID address.
D. The local router prefers the route learned from an EBGP peer over a route learned from an IBGP peer.
Answer: B
Juniper JN0-201 JN0-201 JN0-201 braindump
NO.13 Once the TCP connection is established, which message type initiates the BGP peering process?
A. Open
B. Active
C. Update
D. Keepalive
E. Notification
Answer: A
Juniper test questions JN0-201 JN0-201
NO.14 What command would you use to view an IS-IS adjacency?
A. show iso neighbor
B. show isis neighbor
C. show iso adjacency
D. show isis adjacency
Answer: D
Juniper JN0-201 JN0-201 JN0-201 braindump
NO.15 Which CLI command is used to see the current OSPF link-state database?
A. show ospf database
B. show ospf neighbor
C. show protocols ospf
D. show ospf link-state
Answer: A
Juniper practice test JN0-201 original questions JN0-201
NO.16 What is the purpose of the OSPF link-state update packet?
A. describes a change to the OSPF hello timer
B. carries one or more link-state advertisements
C. establishes and maintains neighbor relationships
D. describes the contents of the entire link-state database
Answer: B
Juniper certification JN0-201 exam JN0-201 dumps JN0-201
NO.17 What are the three components of the ISO NET address? (Choose three.)
A. Area ID
B. N-selector
C. System ID
D. AS number
E. ISO number
F. MAC address
Answer: ABC
Juniper JN0-201 original questions JN0-201 JN0-201
NO.18 How do you enable interface fe-0/0/0 under the [edit protocols isis] level to form both a Level 1 and
Level 2 adjacency?
A. set interface fe-0/0/0.0
B. set interface fe-0/0/0.0 all level
C. set interface fe-0/0/0.0 level 3 enable
D. set interface fe-0/0/0.0 level 1 level 2
Answer: A
Juniper original questions JN0-201 JN0-201 test questions JN0-201 questions
NO.19 Assume that a comparable configuration is applied to your peer in AS 11 and that bi-directional TCP
reachability has been achieved. Which EBGP configuration will allow the BGP session to become
established?
A. routing-options { autonomous-system 64; } protocols { bgp { group external-peer11 { type external;
neighbor 10.0.3.6 { peer-as 11; } } }
B. routing-options { autonomous-system 11; } protocols { bgp { group external-peer1 { type external;
peer-as 11;{ neighbor 10.0.3.6; } }
C. routing-options { autonomous-system 11; } protocols { bgp { group external-peer11 { type external;
peer-as 64;{ neighbor 10.0.3.6; } group external-peer11 { type external; peer-as 64;{ neighbor
10.0.3.6; } } type external; peer-as 64;{ neighbor 10.0.3.6; } } peer-as 64;{ neighbor 10.0.3.6; } }
neighbor 10.0.3.6; } }
D. routing-options { }
E. routing-options { autonomous-system 64; }
F. routing-options { autonomous-system 64; }
G. routing-options { autonomous-system 64; } protocols {
H. routing-options { autonomous-system 64; } protocols { bgp { autonomous-system 64; } protocols { bgp
{ group external-peer101 { } protocols { bgp { group external-peer101 { peer-as 101; protocols { bgp
{ group external-peer101 { peer-as 101; neighbor 10.0.3.6; protocols { bgp { group external-peer101
{ peer-as 101; neighbor 10.0.3.6; } bgp { group external-peer101 { peer-as 101; neighbor 10.0.3.6; } }
group external-peer101 { peer-as 101; neighbor 10.0.3.6; } } peer-as 101; neighbor 10.0.3.6; } }
neighbor 10.0.3.6; } } } } }
Answer: A
Juniper pdf JN0-201 answers real questions JN0-201 JN0-201 exam simulations
NO.20 A firewall filter is applied as an input filter on a transit interface. What three types of traffic will this affect?
(Chose three.)
A. inbound traffic transiting the router
B. outbound traffic transiting the router
C. traffic destined to the Routing Engine
D. traffic destined to the interface address on which the filter is applied
Answer: ACD
Juniper exam prep JN0-201 JN0-201 JN0-201 test questions JN0-201
IT-Tests.com offer the latest HP2-Z27 Questions & Answers and high-quality 642-980 PDF Practice Test. Our 00M-503 VCE testing engine and VCAP5-DCD study guide can help you pass the real exam. High-quality 70-480 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.
Article Link: http://www.it-tests.com/JN0-201.html
没有评论:
发表评论