JN0-730 PDF VCE, JN0-560 Free download, JN0-531 Exam PDF

To choose our IT-Tests.com to is to choose success! IT-Tests.com provide you Juniper certification JN0-730 exam practice questions and answers, which enable you to pass the exam successfully. Simulation tests before the formal Juniper certification JN0-730 examination are necessary, and also very effective. If you choose IT-Tests, you can 100% pass the exam.

All the IT professionals are familiar with the Juniper JN0-560 exam. And everyone dreams pass this demanding exam. Juniper JN0-560 exam certification is generally accepted as the highest level. Do you have it? About the so-called demanding, that is difficult to pass the exam. This does not matter, with the IT-Tests.com's Juniper JN0-560 exam training materials in hand, you will pass the exam successfully. You feel the exam is demanding is because that you do not choose a good method. Select the IT-Tests.com, then you will hold the hand of success, and never miss it.

With the arrival of the flood of the information age of the 21st century, people are constantly improve their knowledge to adapt to the times. But this is still not enough. In the IT industry, Juniper's JN0-531 exam certification is the essential certification of the IT industry. Because this exam is difficult, through it, you may be subject to international recognition and acceptance, and you will have a bright future and holding high pay attention. IT-Tests.com has the world's most reliable IT certification training materials, and with it you can achieve your wonderful plans. We guarantee you 100% certified. Candidates who participate in the Juniper JN0-531 certification exam, what are you still hesitant？Just do it quickly!

IT-Tests.com Juniper JN0-560 practice exam is the most thorough, most accurate and latest practice test. You will find that it is the only materials which can make you have confidence to overcome difficulties in the first. Juniper JN0-560 exam certification are recognized in any country in the world and all countries will be treate it equally. Juniper JN0-560 certification not only helps to improve your knowledge and skills, but also helps your career have more possibility.

Exam Code: JN0-730
Exam Name: DX, Specialist (JNCIS-DX)
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
JN0-730 Bootcamp Total Q&A: 270 Questions and Answers
Last Update: 2014-05-11

>> JN0-730 Test Answers detail

 

Exam Code: JN0-560
Exam Name: Certified Internet Associate.....
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
JN0-560 Exam Questions Total Q&A: 120 Questions and Answers
Last Update: 2014-05-11

>> JN0-560 Free download detail

 

Exam Code: JN0-531
Exam Name: FWV, Specailist(JNCIS-FWV)
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
JN0-531 Real Questions Total Q&A: 145 Questions and Answers
Last Update: 2014-05-11

>> JN0-531 Exam Cram detail

 

Everyone has their own dreams. What is your dream? Is it a promotion, a raise or so? My dream is to pass the Juniper JN0-531 exam. I think with this certification, all the problems will not be a problem. However, to pass this certification is a bit difficult. But it does not matter, because I chose IT-Tests.com's Juniper JN0-531 exam training materials. It can help me realize my dream. If you also have a IT dream, quickly put it into reality. Select IT-Tests.com's Juniper JN0-531 exam training materials, and it is absolutely trustworthy.

JN0-730 (DX, Specialist (JNCIS-DX)) Free Demo Download: http://www.it-tests.com/JN0-730.html

NO.1 Which security feature provides secure tunnels across a public network?
A. dynamic routing
B. Web filtering
C. IPsec
D. firewall filters
Answer: A

Juniper test   JN0-730 test answers   JN0-730 dumps torrent   JN0-730 braindump

NO.2 When a firewall receives the first packet in a series, what will it immediately do?
A. Check its route table.
B. Check its session table.
C. Determine if traffic is crossing zones.
D. Verify that it is not malformed or a fragment.
Answer: D

Juniper   JN0-730 PDF VCE   JN0-730   JN0-730 questions   JN0-730 exam prep   JN0-730 Braindumps

NO.3 Which operating system is used on a NetScreen device?
A. IOS
B. Junos
C. FreeBSD
D. ScreenOS
Answer: A

Juniper Study Guide   JN0-730 certification training   JN0-730 Latest Dumps   JN0-730 Latest Dumps   JN0-730 Exam Dumps   JN0-730 answers real questions

NO.4 Using the CLI, if the startup copy of the ScreenOS is corrupted, from which location can an
image be loaded?
A. TFTP server
B. internal flash
C. PCMCIA card
D. Compact Flash Card
Answer: A

Juniper exam dumps   JN0-730 Exam Tests   JN0-730 Braindumps

NO.5 Which two devices run ScreenOS software? (Choose two.)
A. NetScreen-5200
B. NetScreen-5400
C. SRX240
D. MX480
Answer: C,D

Juniper braindump   JN0-730 Braindumps   JN0-730 Exam PDF   JN0-730 Bootcamp

NO.6 In the packet flow decision process, which pair identifies interzone traffic?
A. source and destination MAC
B. source and destination interface
C. source and destination TCP port
D. source and destination IP address
Answer: B

Juniper Braindumps   JN0-730 test   JN0-730 dumps   JN0-730 dumps   JN0-730 Study Guide

NO.7 Using the CLI, if the startup copy of the ScreenOS on a NS-204 is corrupted, from which two (2)
alternate locations can an image be loaded?
A. ROM
B. TFTP server
C. Internal Flash
D. PCMCIA Card
E. Compact Flash Card
Answer: B,E

Juniper Exam Tests   JN0-730 Real Questions   JN0-730 Practice Test   JN0-730   JN0-730 Exam Dumps

NO.8 A ScreenOS firewall has one interface in the user zone and one interface in the servers zone.
Both interfaces are addressed and active.
The configured policy allows user traffic from the user zone to the FTP server in the servers zone,
but the traffic does not cross the firewall from the client to the server.
What is the most likely problem with the firewall?
A. The ScreenOS firewall has no physical connection to the FTP server.
B. The ALG option on the ScreenOS firewall has not been enabled for FTP traffic.
C. The ScreenOS firewall does not have a route defined to the FTP server's subnet.
D. The ScreenOS firewall does not have a route defined to the FTP client's subnet.
Answer: C

Juniper Exam PDF   JN0-730 Exam Dumps   JN0-730 Test Questions   JN0-730 questions   JN0-730 Practice Exam

Juniper certification JN0-531 exam test software

In today's competitive IT industry, passing Juniper certification JN0-531 exam has a lot of benefits. Gaining Juniper JN0-531 certification can increase your salary. People who have got Juniper JN0-531 certification often have much higher salary than counterparts who don't have the certificate. But Juniper certification JN0-531 exam is not very easy, so IT-Tests.com is a website that can help you grow your salary.

IT-Tests.com provide you with the comprehensive Juniper JN0-531 exam information to help you to succeed. Our training materials are the latest study materials which bring by experts. We help you achieve your success. You can get the most detailed and accurate exam questions and answers from us. Our Training Tools are updated in a timely manner in accordance with the changing of Exam Objectives. In fact, the success is not far away, go down along with IT-Tests.com, then you will come to the road to success.

As long as you need the exam, we can update the Juniper certification JN0-531 exam training materials to meet your examination needs. IT-Tests's training materials contain many practice questions and answers about Juniper JN0-531 and they can 100% ensure you pass Juniper JN0-531 exam. With the training materials we provide, you can take a better preparation for the exam. And we will also provide you a year free update service.

Someone asked, where is success? Then I tell you, success is in IT-Tests.com. Select IT-Tests.com is to choose success. IT-Tests.com's Juniper JN0-531 exam training materials can help all candidates to pass the IT certification exam. Through the use of a lot of candidates, IT-Tests.com's Juniper JN0-531 exam training materials is get a great response aroud candidates, and to establish a good reputation. This is turn out that select IT-Tests.com's Juniper JN0-531 exam training materials is to choose success.

Exam Code: JN0-531
Exam Name: Juniper (FWV, Specailist(JNCIS-FWV))
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 145 Questions and Answers
Last Update: 2013-12-09

God is fair, and everyone is not perfect. As we all know, the competition in the IT industry is fierce. So everyone wants to get the IT certification to enhance their value. I think so, too. But it is too difficult for me. Fortunately, I found IT-Tests.com's Juniper JN0-531 exam training materials on the Internet. With it, I would not need to worry about my exam. IT-Tests.com's Juniper JN0-531 exam training materials are really good. It is wide coverage, and targeted. If you are also one of the members in the IT industry, quickly add the IT-Tests.com's Juniper JN0-531 exam training materials to your shoppingcart please. Do not hesitate, do not hovering. IT-Tests.com's Juniper JN0-531 exam training materials are the best companion with your success.

IT-Tests's experienced expert team has developed effective training program a for Juniper certification JN0-531 exam, which is very fit for candidates. IT-Tests.com provide you the high quality product, which can let you do simulation test before the real Juniper certification JN0-531 exam. So you can take a best preparation for the exam.

IT-Tests.com is website that can help a lot of IT people realize their dreams. If you have a IT dream， then quickly click the click of IT-Tests.com. It has the best training materials, which is IT-Tests.com;s Juniper JN0-531 exam training materials. This training materials is what IT people are very wanted. Because it will make you pass the exam easily, since then rise higher and higher on your career path.

JN0-531 (FWV, Specailist(JNCIS-FWV)) Free Demo Download: http://www.it-tests.com/JN0-531.html

NO.1 You have implemented a hub and spoke VPN. On the hub, there are two tunnel interfaces, one to
each spoke. Both tunnel interfaces are in the same zone.
Which two configuration options will control traffic between the spokes? (Choose two.)
A. Configure the common zone to block inter-zone traffic.
B. Configure the common zone to block intra-zone traffic.
C. Configure each tunnel interface to block intra-zone traffic.
D. Configure one of the tunnel interfaces in a different zone a set policies.
Answer: BD

Juniper braindump   JN0-531 exam prep   JN0-531

NO.2 You create a policy-based VPN, and select an address group for the source address.
What will be the source component of the proxy-id seen by the remote security gateway?
A. the default 0.0.0.0/0
B. the last member of the address group
C. the first member of the address group
D. the subnet that contains all addresses in the address group
Answer: A

Juniper   JN0-531 questions   JN0-531   JN0-531 dumps

NO.3 Which two item pairs are exchanged during Phase 2 negotiations? (Choose two.)
A. proxy-id, SA proposal list
B. IKE cookie, SA proposal list
C. hash [ID + Key], DH key exchange
D. SA proposal list, optional DH key exchange
Answer: AD

Juniper   JN0-531 questions   JN0-531

NO.4 Which item in a virtual system is shared by default?
A. trust zone in the trust-vr
B. trust zone in the untrust-vr
C. untrust zone in the trust-vr
D. untrust zone in the untrust-vr
Answer: C

Juniper   JN0-531   JN0-531   JN0-531   JN0-531

NO.5 Click the Exhibit button.
In the exhibit, the route-based VPN on the SSG 5 needs to configured to allow access only from your PC
to Server G. The SSG 550 is configured with a policy-based VPN from Server G to your PC's host
address.
Assume the gateways are static.
Which proxy-id must be configured?
A. Local: 10.0.0.5/24Remote: 20.0.0.5/24
B. Local: 10.0.0.5/32Remote: 20.0.0.5/32
C. Local: 1.1.1.250/32Remote: 4.4.4.250/32
D. Local: 1.1.1.250/24Remote: 4.4.4.250/24
Answer: B

Juniper   JN0-531 exam prep   JN0-531   JN0-531 original questions   JN0-531 exam prep   JN0-531 test answers

NO.6 Which two statements regarding NHTB are correct? (Choose two.)
A. If the spoke device is not a ScreenOS device, manual configuration of NHTB is required on the hub.
B. If the spoke device is not a ScreenOS device, manual configuration of NHTB is required on the spoke.
C. When configuring routing on a spoke device with one tunnel interface the route to the tunnel interface
does not require a routing gateway address.
D. When configuring routing on a hub device with one tunnel interface terminating multiple VPN spokes,
the route to the tunnel interface does not require a routing gateway address.
Answer: AC

Juniper test   JN0-531   JN0-531   JN0-531 certification training   JN0-531

NO.7 Which three statements are true regarding IKE Phase 1? (Choose three.)
A. Placing the SA proposal list in message 1 is an option.
B. The digital certificate is used to decrypt the session key.
C. The DH key exchange is used to validate the session key.
D. The DH key exchange and digital certificates are both optional.
E. The proxy-id is used to determine which SA is referenced for the VPN.
Answer: ABC

Juniper   JN0-531   JN0-531   JN0-531   JN0-531

NO.8 Which two statements are true regarding the use of dialup VPNs? (Choose two.)
A. They are initiated only by the remote host PC.
B. They can only be connected to the trust zone on a ScreenOS device.
C. They are configured so that the first IKE message will always have the SA proposal list.
D. They can be used as an alternative to connect remote users when a ScreenOS device has reached the
maximum number of LAN-to-LAN tunnels.
Answer: AC

Juniper   JN0-531   JN0-531 test answers

NO.9 Which ScreenOS CLI command is necessary for configuring IGMP on interface ethernet0/1?
A. set igmp interface ethernet0/1
B. set multicast interface ethernet0/1
C. set interface ethernet0/1 igmp router
D. set igmp interface ethernet0/1 enable
Answer: C

Juniper   JN0-531 practice test   JN0-531   JN0-531 exam   JN0-531

NO.10 Which command will show address translation for sessions that have ended?
A. snoop
B. get session
C. get log traffic
D. get dbuf stream
Answer: C

Juniper test   JN0-531   JN0-531 practice test   JN0-531   JN0-531

NO.11 What will happen if you type the command unset protocol vrouter trust-vr protocol ospf?
A. OSPF stops running, but the OSPF configuration is left intact.
B. All OSPF configuration parameters are removed from the vrouter only.
C. All OSPF configuration parameters are removed from all interfaces in the vrouter.
D. All OSPF configuration parameters are removed from the vrouter and from all interfaces in the vrouter.
Answer: D

Juniper answers real questions   JN0-531 answers real questions   JN0-531   JN0-531

NO.12 You have configured the following on your device.
The VPN is not working properly. What is the problem?
A. The policy needs to have the action tunnel.
B. The VPN needs to be bound to the tunnel interface.
C. The tunnel interface needs to be placed in the trust zone.
D. The tunnel interface needs to be associated with the interface in the untrust zone.
Answer: B

Juniper test questions   JN0-531 braindump   JN0-531   JN0-531

NO.13 A VPN tunnel that uses a CA certificate has failed Phase 1 negotiations. The peer's certificate has
been rejected.
What would be causing this problem?
A. The CA certificate has been revoked.
B. One of the peering devices are not synced with the NTP server.
C. The device certificates were generated before the CRL was downloaded thus making them invalid.
D. The CRL has been downloaded, but the certificates have a CDP extension thus making them invalid.
Answer: B

Juniper   JN0-531 exam   JN0-531   JN0-531

NO.14 Click the Exhibit button.
In the exhibit, what is the source IP address of the multicast traffic?
A. 236.1.1.1
B. 10.10.10.1
C. 20.20.20.10
D. 20.20.20.200
Answer: B

Juniper   JN0-531   JN0-531 pdf   JN0-531

NO.15 During main mode negations a failure has occurred while using IKE certificates.
Which message pair would you review to troubleshoot this failure?
A. messages 1 & 2
B. messages 2 & 3
C. messages 3 & 4
D. messages 5 & 6
Answer: D

Juniper   JN0-531   JN0-531   JN0-531 certification   JN0-531 practice test

NO.16 Which command is used to verify that IGMP is running correctly?
A. get route igmp
B. get igmp query
C. set igmp query interface e0/1
D. exec igmp interface e0/1 query
Answer: D

Juniper   JN0-531 exam dumps   JN0-531   JN0-531   JN0-531

NO.17 Click the Exhibit button.
In the exhibit, the hub and spoke VPN uses route-based VPNs and has intra-zone blocking enabled on
the Evil zone.
What is the minimum number of policy rules required to establish full, bi-directional communications
between all locations?
A. 3
B. 4
C. 6
D. 7
Answer: D

Juniper   JN0-531   JN0-531   JN0-531 test questions

NO.18 A VPN tunnel that uses a CA certificate will not become active.
What would be causing this problem?
A. The CA certificate has been revoked.
B. The devices are not synced with the NTP server.
C. The device certificates were generated before the CRL was downloaded thus making them invalid.
D. The CRL has been downloaded, but the certificates have a CDP extension thus making them invalid.
Answer: B

Juniper exam dumps   JN0-531 study guide   JN0-531   JN0-531 demo   JN0-531

NO.19 To which three ScreenOS components can a policy-based routing policy be bound? (Choose three.)
A. zone
B. policy
C. interface
D. virtual router
E. virtual system
Answer: ACD

Juniper   JN0-531   JN0-531   JN0-531

NO.20 What must be enabled to protect Phase 2 key exchanges?
A. Phase 1 PFS
B. Phase 2 SHA
C. Phase 2 3-DES
D. Phase 2 DH key exchange
Answer: D

Juniper original questions   JN0-531 pdf   JN0-531 test questions   JN0-531

NO.21 You have created a VPN to a dynamic peer.
Which two configured parameters must match? (Choose two.)
A. static side peer-id
B. dynamic side local-id
C. static side IP address
D. dynamic side IP address
Answer: AB

Juniper   JN0-531 exam prep   JN0-531 dumps   JN0-531 test   JN0-531

NO.22 What do you need to change in your VPN configuration to use certificates for authentication?
A. Replace the preshared key with the certificate name.
B. Select PFS in Phase 2, then select the certificate to be used.
C. Use a custom set of Phase 1 proposals, all beginning with rsa-.
D. Use a custom set of Phase 2 proposals, all beginning with rsa-.
Answer: C

Juniper exam dumps   JN0-531 demo   JN0-531   JN0-531   JN0-531

NO.23 Which CLI command identifies the multicast sources visible to your ScreenOS device?
A. get route pim
B. get igmp source all
C. exec pim interface all query
D. get vrouter trust-vr protocol pim
Answer: D

Juniper   JN0-531 answers real questions   JN0-531

NO.24 What should you configure to insure an HA cable failure does not result in both devices attempting to
become master?
A. failover count
B. secondary path
C. monitor threshold
D. heartbeat threshold
Answer: B

Juniper   JN0-531   JN0-531 exam   JN0-531

NO.25 Click the Exhibit button.
In the exhibit, the hub and spoke VPN uses route-based VPNs.
What is the minimum number of policy rules required to establish full, bi-directional communications
between all locations?
A. 0
B. 3
C. 4
D. 6
Answer: A

Juniper   JN0-531   JN0-531   JN0-531

NO.26 What must be configured differently for a route-based VPN and a policy-based VPN?
A. proxy-id
B. proposals
C. remote gateway type
D. binding the tunnel interface
Answer: D

Juniper certification   JN0-531 demo   JN0-531 pdf   JN0-531   JN0-531

NO.27 How many tunnels would need to be created to build a full mesh between 10 VPN devices?
A. 10
B. 20
C. 45
D. 100
Answer: C

Juniper answers real questions   JN0-531 questions   JN0-531 exam   JN0-531

NO.28 Which two statements are correct regarding NHTB? (Choose two.)
A. The NHTB table can be viewed with the command get nhtb.
B. The NHTB table can be viewed with the command get interface <tunnel interface>.
C. The NHTB table can be viewed with the command get interface <physical interface>.
D. NHTB is enabled automatically when multiple VPNs are bound to a single tunnel interface.
Answer: BD

Juniper   JN0-531 pdf   JN0-531

NO.29 Your ScreenOS device has come under a SYN flood attack. In the logs, which severity level would you
search to see this event?
A. Alert
B. Critical
C. Warning
D. Emergency
Answer: D

Juniper test answers   JN0-531 test answers   JN0-531   JN0-531   JN0-531   JN0-531

NO.30 Which three items do you need to download and install on your ScreenOS device for IKE gateways to
be able to use digital certificates without OCSP? (Choose three.)
A. the CRL list
B. the SCEP list
C. a local certificate
D. the CA public key certificate
E. the CA private key certificate
Answer: ACD

Juniper   JN0-531   JN0-531 original questions   JN0-531

IT-Tests.com offer the latest 000-283 Questions & Answers and high-quality 000-614 PDF Practice Test. Our 70-342 VCE testing engine and 000-318 study guide can help you pass the real exam. High-quality 648-385 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.it-tests.com/JN0-531.html

Best exercises of Juniper certification JN0-531 exam and answers

IT-Tests.com Juniper JN0-531 exam training materials are provided in PDF format and software format. It contains Juniper JN0-531 exam questions and answers. These issues are perfect, Which can help you to be successful in the Juniper JN0-531 exam. IT-Tests.com Juniper JN0-531 exam comprehensively covers all syllabus and complex issues. The IT-Tests.com Juniper JN0-531 exam questions and answers is the real exam challenges, and help you change your mindset.

Our IT-Tests.com have a huge IT elite team. They will accurately and quickly provide you with Juniper certification JN0-531 exam materials and timely update Juniper JN0-531 exam certification exam practice questions and answers and binding. Besides, IT-Tests.com also got a high reputation in many certification industry. The the probability of passing Juniper certification JN0-531 exam is very small, but the reliability of IT-Tests.com can guarantee you to pass the examination of this probability.

Everyone has a utopian dream in own heart. Dreams of imaginary make people feel disheartened. In fact, as long as you take the right approach, everything is possible. You can pass the Juniper JN0-531 exam easily. Why? Because you have IT-Tests.com's Juniper JN0-531 exam training materials. IT-Tests.com's Juniper JN0-531 exam training materials are the best training materials for IT certification. It is famous for the most comprehensive and updated by the highest rate. It also can save time and effort. With it, you will pass the exam easily. If you pass the exam, you will have the self-confidence, with the confidence you will succeed.

Many candidates who are ready to participate in the Juniper certification JN0-531 exam may see many websites available online to provide resources about Juniper certification JN0-531 exam. However, IT-Tests.com is the only website whose exam practice questions and answers are developed by a study of the leading IT experts's reference materials. The information of IT-Tests.com can ensure you pass your first time to participate in the Juniper certification JN0-531 exam.

Perhaps you have also seen the related training tools about Juniper certification JN0-531 exam on other websites, but our IT-Tests.com has a pivotal position in the field of IT certification exam. IT-Tests.com research materials can 100% guarantee you to pass the exam. With IT-Tests.com your career will change and you can promote yourself successfully in the IT area. When you select IT-Tests.com you'll really know that you are ready to pass Juniper certification JN0-531 exam. We not only can help you pass the exam successfully, but also will provide you with a year of free service.

Someone asked, where is success? Then I tell you, success is in IT-Tests.com. Select IT-Tests.com is to choose success. IT-Tests.com's Juniper JN0-531 exam training materials can help all candidates to pass the IT certification exam. Through the use of a lot of candidates, IT-Tests.com's Juniper JN0-531 exam training materials is get a great response aroud candidates, and to establish a good reputation. This is turn out that select IT-Tests.com's Juniper JN0-531 exam training materials is to choose success.

Why we are ahead of the other sites in the IT training industry? Because the information we provide have a wider coverage, higher quality, and the accuracy is also higher. So IT-Tests.com is not only the best choice for you to participate in the Juniper certification JN0-531 exam, but also the best protection for your success.

Exam Code: JN0-531

Exam Name: Juniper (FWV, Specailist(JNCIS-FWV))

JN0-531 (FWV, Specailist(JNCIS-FWV)) Free Demo Download: http://www.it-tests.com/JN0-531.html

NO.1 Which two statements are correct regarding NHTB? (Choose two.)
A. The NHTB table can be viewed with the command get nhtb.
B. The NHTB table can be viewed with the command get interface <tunnel interface>.
C. The NHTB table can be viewed with the command get interface <physical interface>.
D. NHTB is enabled automatically when multiple VPNs are bound to a single tunnel interface.
Answer: BD

Juniper test questions   JN0-531 test   JN0-531   JN0-531

NO.2 Which three items do you need to download and install on your ScreenOS device for IKE gateways to
be able to use digital certificates without OCSP? (Choose three.)
A. the CRL list
B. the SCEP list
C. a local certificate
D. the CA public key certificate
E. the CA private key certificate
Answer: ACD

Juniper exam   JN0-531 dumps   JN0-531

NO.3 Your ScreenOS device has come under a SYN flood attack. In the logs, which severity level would you
search to see this event?
A. Alert
B. Critical
C. Warning
D. Emergency
Answer: D

Juniper   JN0-531   JN0-531 certification   JN0-531 original questions

NO.4 Which CLI command identifies the multicast sources visible to your ScreenOS device?
A. get route pim
B. get igmp source all
C. exec pim interface all query
D. get vrouter trust-vr protocol pim
Answer: D

Juniper exam dumps   JN0-531 exam dumps   JN0-531   JN0-531   JN0-531 questions

NO.5 To which three ScreenOS components can a policy-based routing policy be bound? (Choose three.)
A. zone
B. policy
C. interface
D. virtual router
E. virtual system
Answer: ACD

Juniper demo   JN0-531   JN0-531 test   JN0-531 exam prep   JN0-531   JN0-531

NO.6 What do you need to change in your VPN configuration to use certificates for authentication?
A. Replace the preshared key with the certificate name.
B. Select PFS in Phase 2, then select the certificate to be used.
C. Use a custom set of Phase 1 proposals, all beginning with rsa-.
D. Use a custom set of Phase 2 proposals, all beginning with rsa-.
Answer: C

Juniper exam prep   JN0-531 exam   JN0-531   JN0-531 study guide

NO.7 Which command will show address translation for sessions that have ended?
A. snoop
B. get session
C. get log traffic
D. get dbuf stream
Answer: C

Juniper   JN0-531 exam dumps   JN0-531 demo   JN0-531

NO.8 Click the Exhibit button.
In the exhibit, the route-based VPN on the SSG 5 needs to configured to allow access only from your PC
to Server G. The SSG 550 is configured with a policy-based VPN from Server G to your PC's host
address.
Assume the gateways are static.
Which proxy-id must be configured?
A. Local: 10.0.0.5/24Remote: 20.0.0.5/24
B. Local: 10.0.0.5/32Remote: 20.0.0.5/32
C. Local: 1.1.1.250/32Remote: 4.4.4.250/32
D. Local: 1.1.1.250/24Remote: 4.4.4.250/24
Answer: B

Juniper   JN0-531   JN0-531 practice test   JN0-531   JN0-531

NO.9 What must be configured differently for a route-based VPN and a policy-based VPN?
A. proxy-id
B. proposals
C. remote gateway type
D. binding the tunnel interface
Answer: D

Juniper   JN0-531   JN0-531 practice test

NO.10 Which two statements are true regarding the use of dialup VPNs? (Choose two.)
A. They are initiated only by the remote host PC.
B. They can only be connected to the trust zone on a ScreenOS device.
C. They are configured so that the first IKE message will always have the SA proposal list.
D. They can be used as an alternative to connect remote users when a ScreenOS device has reached the
maximum number of LAN-to-LAN tunnels.
Answer: AC

Juniper   JN0-531 exam   JN0-531 questions

NO.11 Click the Exhibit button.
In the exhibit, the hub and spoke VPN uses route-based VPNs.
What is the minimum number of policy rules required to establish full, bi-directional communications
between all locations?
A. 0
B. 3
C. 4
D. 6
Answer: A

Juniper certification training   JN0-531   JN0-531   JN0-531 demo

NO.12 What will happen if you type the command unset protocol vrouter trust-vr protocol ospf?
A. OSPF stops running, but the OSPF configuration is left intact.
B. All OSPF configuration parameters are removed from the vrouter only.
C. All OSPF configuration parameters are removed from all interfaces in the vrouter.
D. All OSPF configuration parameters are removed from the vrouter and from all interfaces in the vrouter.
Answer: D

Juniper practice test   JN0-531   JN0-531   JN0-531   JN0-531 study guide

NO.13 Which two item pairs are exchanged during Phase 2 negotiations? (Choose two.)
A. proxy-id, SA proposal list
B. IKE cookie, SA proposal list
C. hash [ID + Key], DH key exchange
D. SA proposal list, optional DH key exchange
Answer: AD

Juniper exam prep   JN0-531   JN0-531

NO.14 Which three statements are true regarding IKE Phase 1? (Choose three.)
A. Placing the SA proposal list in message 1 is an option.
B. The digital certificate is used to decrypt the session key.
C. The DH key exchange is used to validate the session key.
D. The DH key exchange and digital certificates are both optional.
E. The proxy-id is used to determine which SA is referenced for the VPN.
Answer: ABC

Juniper demo   JN0-531 demo   JN0-531

NO.15 You have created a VPN to a dynamic peer.
Which two configured parameters must match? (Choose two.)
A. static side peer-id
B. dynamic side local-id
C. static side IP address
D. dynamic side IP address
Answer: AB

Juniper   JN0-531 study guide   JN0-531 practice test

NO.16 What should you configure to insure an HA cable failure does not result in both devices attempting to
become master?
A. failover count
B. secondary path
C. monitor threshold
D. heartbeat threshold
Answer: B

Juniper certification training   JN0-531   JN0-531

NO.17 A VPN tunnel that uses a CA certificate will not become active.
What would be causing this problem?
A. The CA certificate has been revoked.
B. The devices are not synced with the NTP server.
C. The device certificates were generated before the CRL was downloaded thus making them invalid.
D. The CRL has been downloaded, but the certificates have a CDP extension thus making them invalid.
Answer: B

Juniper   JN0-531 pdf   JN0-531 certification training   JN0-531 exam

NO.18 You create a policy-based VPN, and select an address group for the source address.
What will be the source component of the proxy-id seen by the remote security gateway?
A. the default 0.0.0.0/0
B. the last member of the address group
C. the first member of the address group
D. the subnet that contains all addresses in the address group
Answer: A

Juniper   JN0-531 exam   JN0-531 certification training   JN0-531

NO.19 How many tunnels would need to be created to build a full mesh between 10 VPN devices?
A. 10
B. 20
C. 45
D. 100
Answer: C

Juniper demo   JN0-531   JN0-531 test questions

NO.20 Click the Exhibit button.
In the exhibit, the hub and spoke VPN uses route-based VPNs and has intra-zone blocking enabled on
the Evil zone.
What is the minimum number of policy rules required to establish full, bi-directional communications
between all locations?
A. 3
B. 4
C. 6
D. 7
Answer: D

Juniper   JN0-531   JN0-531

NO.21 Which command is used to verify that IGMP is running correctly?
A. get route igmp
B. get igmp query
C. set igmp query interface e0/1
D. exec igmp interface e0/1 query
Answer: D

Juniper study guide   JN0-531   JN0-531 certification training   JN0-531 demo   JN0-531   JN0-531 pdf

NO.22 What must be enabled to protect Phase 2 key exchanges?
A. Phase 1 PFS
B. Phase 2 SHA
C. Phase 2 3-DES
D. Phase 2 DH key exchange
Answer: D

Juniper   JN0-531   JN0-531 certification   JN0-531

NO.23 Which ScreenOS CLI command is necessary for configuring IGMP on interface ethernet0/1?
A. set igmp interface ethernet0/1
B. set multicast interface ethernet0/1
C. set interface ethernet0/1 igmp router
D. set igmp interface ethernet0/1 enable
Answer: C

Juniper pdf   JN0-531 dumps   JN0-531 demo

NO.24 Which item in a virtual system is shared by default?
A. trust zone in the trust-vr
B. trust zone in the untrust-vr
C. untrust zone in the trust-vr
D. untrust zone in the untrust-vr
Answer: C

Juniper dumps   JN0-531 test   JN0-531 test   JN0-531 test questions

NO.25 Click the Exhibit button.
In the exhibit, what is the source IP address of the multicast traffic?
A. 236.1.1.1
B. 10.10.10.1
C. 20.20.20.10
D. 20.20.20.200
Answer: B

Juniper   JN0-531   JN0-531 dumps

NO.26 Which two statements regarding NHTB are correct? (Choose two.)
A. If the spoke device is not a ScreenOS device, manual configuration of NHTB is required on the hub.
B. If the spoke device is not a ScreenOS device, manual configuration of NHTB is required on the spoke.
C. When configuring routing on a spoke device with one tunnel interface the route to the tunnel interface
does not require a routing gateway address.
D. When configuring routing on a hub device with one tunnel interface terminating multiple VPN spokes,
the route to the tunnel interface does not require a routing gateway address.
Answer: AC

Juniper   JN0-531   JN0-531   JN0-531

NO.27 You have implemented a hub and spoke VPN. On the hub, there are two tunnel interfaces, one to
each spoke. Both tunnel interfaces are in the same zone.
Which two configuration options will control traffic between the spokes? (Choose two.)
A. Configure the common zone to block inter-zone traffic.
B. Configure the common zone to block intra-zone traffic.
C. Configure each tunnel interface to block intra-zone traffic.
D. Configure one of the tunnel interfaces in a different zone a set policies.
Answer: BD

Juniper answers real questions   JN0-531 test answers   JN0-531   JN0-531   JN0-531 answers real questions

NO.28 During main mode negations a failure has occurred while using IKE certificates.
Which message pair would you review to troubleshoot this failure?
A. messages 1 & 2
B. messages 2 & 3
C. messages 3 & 4
D. messages 5 & 6
Answer: D

Juniper practice test   JN0-531   JN0-531 test   JN0-531 certification training   JN0-531

NO.29 A VPN tunnel that uses a CA certificate has failed Phase 1 negotiations. The peer's certificate has
been rejected.
What would be causing this problem?
A. The CA certificate has been revoked.
B. One of the peering devices are not synced with the NTP server.
C. The device certificates were generated before the CRL was downloaded thus making them invalid.
D. The CRL has been downloaded, but the certificates have a CDP extension thus making them invalid.
Answer: B

Juniper   JN0-531 test questions   JN0-531   JN0-531 test answers

NO.30 You have configured the following on your device.
The VPN is not working properly. What is the problem?
A. The policy needs to have the action tunnel.
B. The VPN needs to be bound to the tunnel interface.
C. The tunnel interface needs to be placed in the trust zone.
D. The tunnel interface needs to be associated with the interface in the untrust zone.
Answer: B

Juniper practice test   JN0-531 questions   JN0-531   JN0-531

IT-Tests.com have a strong It expert team to constantly provide you with an effective training resource. They continue to use their rich experience and knowledge to study the real exam questions of the past few years. Finally IT-Tests's targeted practice questions and answers have advent, which will give a great help to a lot of people participating in the IT certification exams. You can free download part of IT-Tests's simulation test questions and answers about Juniper certification JN0-531 exam as a try. Through the proof of many IT professionals who have use IT-Tests's products, IT-Tests.com is very reliable for you. Generally, if you use IT-Tests's targeted review questions, you can 100% pass Juniper certification JN0-531 exam. Please Add IT-Tests.com to your shopping cart now! Maybe the next successful people in the IT industry is you.